Skip to main content

Embedded LED PCBs in Membrane Switches: What are They and What do They do?

 



A Definition of Embedded LED PCB’s

 

Light emitting diodes (LEDs) are semiconductor diodes. LEDs belong to the group of electroluminescent luminaries, and they generate light by recombining charge-carrier pairs in a semiconductor with an appropriate energy band gap. LEDs are utilized in both industrial and consumer markets because of their low operating voltage and power, compact sizes, and extended lifetime and stability. One of their most appealing characteristics is their ability to generate light without generating much heat, which makes them safe for daily operation. Their characteristics are the main reason that LEDs are embedded in printed circuit boards (PCBs). The LEDs are dependable and efficient enough for PCB applications.

 

Embedded LED PCBs often feature single or bi-color LEDs in blue or white. They serve as indicator lights, especially in non-tactile membrane switches. Embedded LED PCBs frequently are used under polyester graphic and under rubber keypads as well.

 

Embedded LED PCBs and User Interfaces

 

Printed circuit boards often are used for the lower circuit in a membrane switch, especially because they provide structural display windows with LED indicators. These often easily integrate into the PCB membrane switch design, but there are a few choices when it comes to deciding which type of LED to use.

 

Single point and block LEDs – Single point and block LEDs are the most versatile. They function well with nearly any type of material surface finishes. Keep in mind that for greater light diffusion, it is better to use a matte or textured surface. It’s also important to remember that while LEDs cannot come through a tactile switch’s active area, they can be graphically manipulated to appear as though they are part of the switch.


Integral, or surface mounted, single point LEDs – Integral, or surface mounted, single point LEDs may be mounted on the bottom layer lower circuit. A wider range of colors is available for these types of LEDs, including bi-color. It is fairly simple to allow for termination from the same connector tail as the switches themselves if you emboss the graphic layer to accommodate the LEDs. Keep in mind that you do not need to emboss the graphic of you provide the LED termination on a separate tail.


Benefits of Embedded LED PCBs


As electronics get smaller and thinner, it is an advantage to use LED membrane switches because it allows for simpler product sourcing and final assembly. These embedded LED PCBs are best suited for low-light environments, consumer devices, appliances, medical devices, light to medium industrial applications, and some aviation and marine applications. No matter the application the benefits of the embedded LED PCB are many, including:

 

Lightweight, low profile

Lower cost backlit membrane switch

Dust and moisture resistant

Easy to integrate into complex interface assemblies

Efficient low power consumption

Available in a wide variety of sizes, colors, and intensities

May be used in silver flex membrane switches and copper flex membrane switches


When the LED is embedded in the PCB, it is easier to then combine the LED membrane switch with keypads, touch screens, and other types of membrane switches. The embedded LED PCBs yield more freedom of design, even when creating complex back-lit switch assemblies. The thinness of an LED membrane switch helps to reduce the overall footprint of those complex switch interfaces. Oftentimes, designers and engineers choose embedded LED PCBs when revising and upgrading products.


Overall, embedded LED PCBs deliver the most affordable backlighting for membrane switches. They sometimes are a better choice for backlighting small icons and symbols, as uniform backlighting of larger icons and symbols is not as easy to achieve with embedded LED PCBs.

Comments

Post a Comment

Popular posts from this blog

Brief Introduction to Flat Spiral Coil Inductors

  Hi guys! Today JRPanel would like to share a few points about Flat Spiral Coil  Inductors  with you. Basically, a flat coil inductor is an inductor wound with flat copper wire.  The picture below is the side view, we can see that each circle of copper wire is arranged very compact. Here are some of the application characteristics of flat coils : 1.  High current inductance 2.  Lowest DC resistance           3.  Can ensure smooth drop of current-resistant inductance 4.  Suitable for reflow SMT process 5.  Lead-free, RoHS compliant This pciture shows a flat coil product.  It is generally used in power supplies, personal computers and other handheld  electronic devices . Advantages of  F lat  C oil  I nductors are : 1.  Scientific and reasonable space design. 2.  Tight and flat between turns ensures the effective cross-sectional area of the wire, which greatly reduces the copper loss ...
Post a Comment
Read more

Tactile and Non-Tactile membrane switches

Tactile and Non-Tactile membrane switches JRPanel         Erin KOU      JAN 14, 2020 The most economical and reliable design is the non-tactile membrane switch . Non- tactile membrane switch is flat and has no tactile feedback.  However, this design relies on other methods of identifying a feedback or that a connection is made.  These include indicator LEDs (visual), LCD screen (visual), or a sound(audible). In other words, an LED light can blink or a beeping sound can be heard when a button is pressed. This type of non-tactile membrane switch has the longest life cycle and reliability. The other type of membrane switch is the tactile membrane switch. Tactile membrane switch is very popular because it provides a direct feedback to users that a connection is made.  One way to design a tactile membrane switch is to dome emboss the keys on the graphic overlay. Although it is a little bit more cost that...
Post a Comment
Read more

The Difference Between PVC, PC and PET in Membrane Switch Applications

  In membrane switch fileds, there are 3 main materials being used in production, PVC, PC and PET. To help you choose the proper material for your product, we would like to introduce you the difference between PVC, PC and PET in membrane switch applications.   1. PVC    PVC  is also called polyvinyl chloride membrane, the full name is Polyvinylchlorid membrane. The top layer of this structure is lacquer, the middle is polyvinyl chloride, and the bottom layer is back-coated adhesive. The price of PVC membrane is low, and it has excellent chemical resistance and insulation function. It is used in sign panels, but not suitable for membrane switches and light touch panels. The global usage of PVC membrane ranks second among various synthetic materials.   2. PC    PC is also called polycarbonate membrane, the thinnest is 0.01mm thick, amorphous, odorless, non-toxic, high transparency and low fogging. Chemical resistance: Dilute acid...
Post a Comment
Read more